Tankimatic is an amazingly engineered product which will make your life easier. It will automatically turn on your water pump/motor ON when water level in overhead tank is low and turn it off when it is full. Saving you Time, Money and precious nature resources. We guarantee that after installation not even a single drop will go to waste.
Tankimatic is wireless, Yes you heard it right… It communicates between water pump/motor and tank using Radio Frequency, because of this there are no messy and dangerous wires between Water pump to Water tank and the whole system automatically becomes so eye appealing that you won’t even know it is there. That is why we do not have to plan route for wires and hire expensive electricians to do the wiring so even Tankimatic’s installation saves you money. Tankimatic’s installation is very simple and the whole installation process takes only 10-15 minutes.
It is so easy that anyone who can change TV plug can install Tankimatic.
Tankimatic is designed with safety as a priority. It operates on extremely safe voltage levels like 5 Volts and 12 Volts so we guarantee it, you will never have to worry about dangerous wires near your tank anymore.
Tankimatic also has a manual switch on the pump unit. So if you have to wash your car or water your lawn, You can simply operate manual switch to turn on the pump.
Tankimatic has three parts
- Pump unit,
- Tank unit
- Float switch.
The float switch is first connected to tank unit and then it is placed inside the water tank to measure water level.
The pump unit is connected with the water pump and receives water level data from the tank unit wirelessly.
The pump unit operates the water pump when water in tank is low and turns it off when water is full.
Pump unit has three lights.
Green – Indicates unit is ready and working.
Yellow – When Blinking it indicates signal is being received to turn on the pump.
Red – Lights up when the pump is on.
|Overhead sensor voltage||5 V|
|Underground sensor voltage||12 V|
|Input/Output voltage||220 V|
|RF frequency||433 Mhz|
|RF Range||100m (LOS)|
|Standby current consumption||<1W|
|Operating current consumption||4W|
|MCU technology||8 bit MCU|
|Estimated range W/O LOS||60m|